I am a newbie in the Micro-Controller and I wanted to help in the project
To measure the temperature sensor through the ... At first the work of a password and when it is entered incorrectly 3 times is not allowed to enter the system either way if inserted properly entered into and is measured in temperature
And when it increases the temperature of 26 Celsius motor is running at different speeds depending on the increase in temperature .... After this i want to transfer data with uart
the thing to do is break the project down into modules that you can implement and test
for example, get the UART operational - writing characters and reading characters (you need this before you can do the other parts)
then add the temperature sensing, then the LCD, etc
hmm... i assume what you mean by that is when the password is right, the user can enter and read the temperature data ..
can be easily done by an if statement. B)
I can do the project. I can do the LCD part, ADC part and PWM motor speed control part using mikroC, but have never used UART/USART. You have to do the UART part. Please zip and upload the proteus .dsn file of your project.
For password what is your character table. Are you using 0-9 and A-Z or are you using PC Keyboard?