Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] I need library for CMOS 0.18um

Status
Not open for further replies.
I found 0.18um tech file.
 

Attachments

  • 0.18um tech file.zip
    49.8 KB · Views: 117
  • Like
Reactions: Birillo

    Birillo

    Points: 2
    Helpful Answer Positive Rating
notice if have error, in simulation, create a folder in below address
D:\program arshad\arshad2\hspice\ookk\Hspice_model_files
and copy "mm018.l" to that.

I notice it, because I have problem with this file, and solved by copy the file to above address.
 

also I found another model, that can easily change Length of CMOS Transistor. and support 0.18um tech.
I put two examples in the first lines of file.
 

Attachments

  • CMOS_models.sp.zip
    1.7 KB · Views: 78
  • Like
Reactions: Birillo

    Birillo

    Points: 2
    Helpful Answer Positive Rating
I need also library file for cadence virtuoso IC615 !!!
thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top