Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

i.mx 25 linux power management issue with Xfbdev -keybd

Status
Not open for further replies.

kilaru.ramakrishnarao

Newbie level 1
Newbie level 1
Joined
May 20, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,292
Dear all,
We are facing linux power management failures .Our h/w and s/w details are

ARM -------- i.mx25
LTIB -------- L2.6.35-11-01-00_ER
Linux kernel -------- Linux - 2.6.31
Cross compiler -------- arm-none-linux-gnueabi-* ( version-4.4.4)

We make the LTIB for Gnome desktop environment.For normal follow it was working fine.
But when we are using the Power management (echo mem > /sys/power/state) our device going to sleep.
But after wakeup 'Xfbdev' not resuming properly.

Our Xfbdev cmd is

"Xfbdev -mouse tslib,2,device=/dev/input/ts0 -keybd keyboard,,device=/dev/input/event0"

What we observe that, when we pass "-keybd keyboard,,device=/dev/input/event0" to Xfbdev resuming fails
(This event0 is device specific keyboard event ).

We checked linux standardised usb keyboard driver along with lenovo usb keyboard ,but same issue appears.

Note : If we kill the Xfbdev and run once again its working normally.If we again going to Power management Xfbdev resuming fails.

Thanks and regards,
Kilaru.Ramakrishna Rao
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top