Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to replicate a pcb design in altium

Status
Not open for further replies.
S

swap7etc

Newbie level 4
Joined
Jul 2, 2014
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
39
i need to replicate the pcb layout with or without routing for 12 times,kindly help for this.
 

did u try ctrl+c for copy and ctrl+v for paste(select whole layout before copy) ?? it will work.
 

Kick said:
did u try ctrl+c for copy and ctrl+v for paste(select whole layout before copy) ?? it will work.
Click to expand...


i tried this but i want it along with nets, as the part is in schematic and i need to form a replica using the components with nets as like a template.
 

Hi,
If you need net information after copying the design, go to Design/Netlist/Configure physical nets.
This will assign net name's as NewNet1, NewNet2......
Rgrds,
Anil
 

you can use the room function!
 

Hi,
I have a problem with copying rooms. Routing hasn't been copied although it is thicked in 'copy room formats' options.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top