Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Use PICKit programmer ...... but if you need use ICD2 pay attention on connections because it is much confuse in documentation of ICD2. Microchip has a connection document more easy of understand in your homepage
The chips which come with internal oscillator required a simple trick to make them working first read them as blank chip note the calibration value of oscillator now load the program and you will see calibration value omit from the load memory
Now used option load calibration value in programmer and enter value which you noted during blank read write them in box just after 28, the attach picture self explanatory for all this procedure
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.