Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to program LPC2148 IC?

Status
Not open for further replies.

prasannavenkatesh

Newbie level 3
Joined
Sep 24, 2009
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai,india
Activity points
1,307
Hi, I am new for this forum

I have lpc2148 ic how to program to flash memory.
i have lpc2000 flash utility ver2.2.3 when i connect the target board to pc and start programming the error msg will appear cant communicate with board.
i check my hardware that connection properly vss,vdd and P0.14 pin pull to low then i cant choose the device in the flash utility. how to program the lpc2148
Any one help to me and explain step by step
 

s3034585

Full Member level 4
Joined
May 24, 2004
Messages
227
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,103
Re: LPC2148

try flashmagic utility. lpc2000 flash utility dosent support lcp2148. start with flashmagic using smaller baud rate and go on increasing till you can communicated with the chip.
 

prasannavenkatesh

Newbie level 3
Joined
Sep 24, 2009
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai,india
Activity points
1,307
Re: LPC2148

hi,
I also try falshmagic but i cant programming.........
tell the detail of programming in step by step
 

nishantmb

Newbie level 6
Joined
Sep 23, 2009
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,346
Re: LPC2148

there is an issue of your board not able to communicate make sure your board resets well. i.e. reset ckt is working properly.

After that go throu the manual of flash magic if this does not work le t me know
 

amol_gharpure

Newbie level 1
Joined
Jun 4, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Re: LPC2148

prasannavenkatesh said:
Hi,
Every one pls send me the proper circuit for programming lpc2148 and how to program explain step by step pls send to my email id prasanna281985(at)gmail.com
In flash magic pls make sure that you have selected the Automatic Reset option.
 

s3034585

Full Member level 4
Joined
May 24, 2004
Messages
227
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,103
Re: LPC2148

just copy U2 related circuit and you will be able to program using flash magic
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top