IN some applications v need a pulse of knowm ht & width genert in response to a
trigger signal.The width of pulse is predictable so its trailing edge can be used for timing purposes i.e to initiate a part task at a specified time.
yes a monostable vibrator can be implemented using the 555 IC
pls go thru data sheets of 555
the 555 monostabil multi vibrator use same design as with astabel multivibtator exept that the monostable multivibrator require input from pin no 2 of ic 555 and if there's pulse coming from the pin it will oscillate
Hi Tahmid & all,
So a ciruit, builded with (ECL) line receivers, is well knowed in the high speed puls technic too (from ca. 2 nsec pulswidths), some time called "pulse strecher"....
Greatings!
K.