how to implement a monostable vibrator

[aman]

monostable vibrator

how to implement a monostable vibrator
can it be done using an 555 IC if so how

 

[papyaki]

monostable vibrator circuit

Hi,

All 555 basic applications are discribded in its datasheet :

h**p://www.fairchildsemi.com/ds/NE/NE555.pdf

Replace * by t

 

[Maverickmax]

monostabil multivibrator 555

Aman

If you want a quick way of building circuit with 555 IC and learn a bit more about its principles.

I would highly recommend you to check this link because it explains almost everything about 555 IC and interesting circuits

http://www.williamson-labs.com/555-circuits.htm#60hz

Enjoy

Maverickmax

 

[bepmcam]

555 monostabil

IN some applications v need a pulse of knowm ht & width genert in response to a
trigger signal.The width of pulse is predictable so its trailing edge can be used for timing purposes i.e to initiate a part task at a specified time.

yes a monostable vibrator can be implemented using the 555 IC
pls go thru data sheets of 555

 

[fsmyth]

555 monostable vibrator

555 monostable examples and calculations at:

**broken link removed**

<als>

 

[nand_gates]

what is a monostable mutli vibrator?

Goto
**broken link removed**

Good one for IC555. Monostable using 555 is explained here...

 

[e_eja]

monostable vibrators

the 555 monostabil multi vibrator use same design as with astabel multivibtator exept that the monostable multivibrator require input from pin no 2 of ic 555 and if there's pulse coming from the pin it will oscillate

 

[Vonn]

555 monostable multivibrator

also you can build a very good monostable using 74ls122/123 I think it's better than using 555

 

[graciousparul]

You can check out this and try to change the values:

https://delabs-circuits.com/cirdir/theory/gates/doc00019.html

 

[sathishmeped]

Can a monostable multivibrator done using 741. If yes, i want the circuit.

 

[abacusdheda]

Re: monostable vibrator

how to implement a monostable vibrator
can it be done using an 555 IC if so how

http://www.kpsec.freeuk.com/555timer.htm
refer this it explains everything you need

 

[Tahmid]

Hi sathishmeped and all,
Take a look at this:
**broken link removed**
Article:
http://www.ecelab.com/circuit-monostable-opamp.htm

 

[karesz]

Hi Tahmid & all,
So a ciruit, builded with (ECL) line receivers, is well knowed in the high speed puls technic too (from ca. 2 nsec pulswidths), some time called "pulse strecher"....
Greatings!
K.

 

[Olajide]

I will if someone could please highligth the uses of a monostable vibrator

 

[karesz]

Hi,
But you have it-2 posts befor, from Tahmid
k.

Added after 2 minutes:

On that you give into an start/trigger puls and it delivers for you an output puls with your wished width_C2&R3.

 

[Olajide]

Please i need the diagram of the simplest inverter circuit

Added after 22 minutes:

Tahmid please,can you send a circuit for a (12v, 12mA) battery charger

Added after 52 seconds:

Tahmid please,can you send a circuit for a (12v, 12mA) battery charger

Added after 1 minutes:

Tahmid please,can you send a circuit for a (12v, 12mA) battery charger

Added after 1 minutes:

Tahmid please,can you send a circuit for a (12v, 12mA) battery charger

 

[karesz]

Hi Olajide,
If you dont apply it: HCF4047, I think is the double MM 74LS/HC122/3 to select...
K.

Check pls fig. 10 in tis Fairchild application...
Apropos; what kind of time do you need?