Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to get the foundry libraries of CAD RFIC/MMIC?

Status
Not open for further replies.

roee_by

Newbie level 6
Joined
Aug 1, 2007
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,358
I would like to gain some experience with CAD RFIC/MMIC for my thesis.My favorite is ADS but MWO2007 is also very enjoyable to use. I think the best way to learn how to cop with real-world RF issues is doing the design with real foundry libraries (IBM,Triquint etc),rather than using simplified models,which sometimes hardly reflects reality.
My question is-how to get these libraries? what interest does a company have to give them to a non-comercial use?
any suggestions?
 

khouly

Advanced Member level 5
Joined
Oct 20, 2003
Messages
2,368
Helped
461
Reputation
916
Reaction score
101
Trophy points
1,343
Location
EGYPT
Activity points
13,244
CAD RFIC/MMIC

u need to contact the companies and get it for educational use , some foundaries support this

khouly
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top