Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to get values of Zin_Fund_at_max_PAE and Zload_Fund_at_Max_Power

pusparaga

Full Member level 4
Joined
Oct 19, 2013
Messages
197
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Activity points
2,988
I am simulating load pull analysis of PA. While simulating Load Pull Analysis, I want to get Zin_Fund_at_Max_PAE and ZLoad_Fund_at_max_Power like I have shown in below screen shot of Pdel_dBm_and_PAE_at_max_Power. Please help me in this regard.
 

Attachments

  • Schematic.jpg
    Schematic.jpg
    130.8 KB · Views: 54
  • ADS_Load_Pull_Measurement.jpg
    ADS_Load_Pull_Measurement.jpg
    200 KB · Views: 71
  • Pdel_dBm_and_PAE_at_max_Power_!.png
    Pdel_dBm_and_PAE_at_max_Power_!.png
    924.5 KB · Views: 61
Nice template. It gives you all you need for a PA design.
You will choose appropriate impedances and operating point @ desired target.
 
Nice template. It gives you all you need for a PA design.
You will choose appropriate impedances and operating point @ desired target.
But I don't know how to generate that template(Below attached screen shot).
 

Attachments

  • Pdel_dBm_and_PAE_at_max_Power_!.png
    Pdel_dBm_and_PAE_at_max_Power_!.png
    924.5 KB · Views: 55
But I don't know how to generate that template(Below attached screen shot).
If this template is not available for public, you can use "Load Pull Design Guide" of ADS. There are very well prepared design guides targeting different purposes. Choose an appropriate one.
 
If this template is not available for public, you can use "Load Pull Design Guide" of ADS. There are very well prepared design guides targeting different purposes. Choose an appropriate one.
Please show me where is it? please show me if link is available or pdf or jpeg or screen shot
 

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top