btv_murthy
Full Member level 3
Hello sir ,
For 4 way Wilkinson power divider , I used the TFR as isolation resistor, I don't know ,how to find the thickness and width of TFR. I am getting the wrong values for both circuit and EM simulation for S- parameters for S(3,2) and S(1,1).I expect the reults as follows for both circuit and EM simulations.
For circuit simulation S(1,1) S(2,1) S(3,1) S(3,2)For EMSimulation S(1,1) S(2,1) S(3,1) S(3,2)
- 36.12 -3.02 -3.04 -44.32 -36.12 -3.02 -3.04 -44.32
please help me, how to find the values of Width and thickness of TFR for 100 ohm resistor and 3 GHZ frequency for 4 way Wilkinson power divider. Please help me as soon as possible.
Here with ,I am attaching the jpeg file of 4 WY WILKINSON POWER DIVIDER, I got following results.
For circuit simulation S(1,1) S(2,1) S(3,1) S(3,2)For EMSimulation S(1,1) S(2,1) S(3,1) S(3,2)
- 19.185 -3.4554 -3.4554 -7.2196 -19.185 -3.4554 -3.4554 - 7.2196
I am getting s(3,2 ) value for circuit simulation and EM simulation as -7.2196 , I have to get s(3,2) value as more than -34DB value.Can u anybody help me to get 4 WY WILKINSON DIVIDER
S(3,2) as more than -34 DB, please help me.
For 4 way Wilkinson power divider , I used the TFR as isolation resistor, I don't know ,how to find the thickness and width of TFR. I am getting the wrong values for both circuit and EM simulation for S- parameters for S(3,2) and S(1,1).I expect the reults as follows for both circuit and EM simulations.
For circuit simulation S(1,1) S(2,1) S(3,1) S(3,2)For EMSimulation S(1,1) S(2,1) S(3,1) S(3,2)
- 36.12 -3.02 -3.04 -44.32 -36.12 -3.02 -3.04 -44.32
please help me, how to find the values of Width and thickness of TFR for 100 ohm resistor and 3 GHZ frequency for 4 way Wilkinson power divider. Please help me as soon as possible.
Here with ,I am attaching the jpeg file of 4 WY WILKINSON POWER DIVIDER, I got following results.
For circuit simulation S(1,1) S(2,1) S(3,1) S(3,2)For EMSimulation S(1,1) S(2,1) S(3,1) S(3,2)
- 19.185 -3.4554 -3.4554 -7.2196 -19.185 -3.4554 -3.4554 - 7.2196
I am getting s(3,2 ) value for circuit simulation and EM simulation as -7.2196 , I have to get s(3,2) value as more than -34DB value.Can u anybody help me to get 4 WY WILKINSON DIVIDER
S(3,2) as more than -34 DB, please help me.