Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to fill ground in Specific space of the board OrCad 9.0?

Status
Not open for further replies.

kishor jadhav

Member level 1
Joined
Apr 11, 2009
Messages
38
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Pune, Maharashtra, India
Activity points
1,494
Ground Filling

how to fill ground in Specific space of the board (e.g. inside of FPGA or Oscillator) in OrCAD 9.0?


Thanks & Regards,

Kishor Jadhav
 

dmd4raj

Member level 4
Joined
Jun 23, 2008
Messages
69
Helped
11
Reputation
22
Reaction score
7
Trophy points
1,288
Activity points
1,722
Re: how to fill ground in Specific space of the board OrCad

Select the obstacle tool from the tool bar and draw the outline where you want the copper pour.
After drawing the outerline just select the outer line and right click goto properties or just double click on the obstacle line.
Now select the option "copper pour" in the drop down box instead of board outline.
Now below this drop down box select the net name to which you want to connect the copper pour.
Give the clearence as 20mils.now press ok.
You will get the copper area where u have drew the outer line.
Let me know whether it is working fine or not

Regards
Rajan.K
+919025815864
 

kishor jadhav

Member level 1
Joined
Apr 11, 2009
Messages
38
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Pune, Maharashtra, India
Activity points
1,494
Re: how to fill ground in Specific space of the board OrCad

Gr8 .................. Thanks

Its work effectively & so easy


Thanks & Regards,

Kishor Jadhav
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top