How to design coaxial antenna feeding by CADFEKO?

[KhangKhang]

cadfeko

Does anyone have an example or know how to design a coaxial cable for antenna feeding in CADFEKO!?
There are 2 scripting examples in EDITFEKO, but it is quite difficult to understand and it seems impossible to implement again in CADFEKO.

Please share any advice or experience!

Thanks in advance!

 

[eastern]

from cadfeko to editfeko

Dear KhangKhang

I think the EDITFEKO cards are the best way to model coax ports. You may combine the capabilities of CADFEKO with EDITFEKO. just build the necessary parts in CADFEKO, import it into EDITFEKO and then add the remaining parts that are more convinient in "EDITFEKO" in the text format.
I do not remember the exact way to implement a Coax port but I may read the help again if your problem consists.

 

[KhangKhang]

how to design antenna in cadfeko

Thanks eastern!

I have tried this way! There may have a little bit difficult , but ...that is the only way , i think!

Added after 5 hours 28 minutes:

do you know how to import from ADFEKO to EDIT FEKO?
the opposite is impossible, isn't it?

Thanks!