Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to decide delta-sigma internal bitwidth?

Status
Not open for further replies.

feel_on_on

Full Member level 5
Joined
Apr 29, 2005
Messages
284
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,298
Activity points
3,234
hi,guys
anyone can tell me how to decide delta-sigma internal bitwidth?
 

feel_on_on

Full Member level 5
Joined
Apr 29, 2005
Messages
284
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,298
Activity points
3,234
nobody know how to decide internal bit width in a delta-sigma modulator?
 

nagula suresh

Junior Member level 3
Joined
Jan 23, 2005
Messages
29
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Activity points
270
i understand that u r asking regarding the order of the DAC AND adc.,
the multi-bit quantizer value can be a design trade-off.,
with low osr,the snr can be increased by incresing the bits.,i think 3-bits is sufficient.,
it will be more clear,if u cud mention what is u r OSR and what is the required SNR ratio for u.,
 

feel_on_on

Full Member level 5
Joined
Apr 29, 2005
Messages
284
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,298
Activity points
3,234
just single bit quantizer,OSR =32,internal bitwidth means in integrater stages what bitwidth I ought to set ?

Added after 1 minutes:

then...tell me how to calculate SNR ?when designing a DAC with single bit delta-sigma modulator?
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top