Hi all,
i have a problem that i have an electronic circuit powered with 5 dcV.
when i connect adapter 5 dcV and measure input socket voltage it reads only 0.94 dcV why this drop occurs ?
please help
thanks alot
goodbye
This is normal only if the load is operative i.e. if you connect a motor the load is very small and if you measure it with an ohmetter it would read less than an ohm. So if you want to connect it with a power source with a short circuit protection I persomnally have faced this situation plus from your readings your load needs more than 5 A for you to operate this load. Be very careful and pay attention that your power source does not heat up!