Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help on Interrupt in MS EVC 4.0

Status
Not open for further replies.

btminzon

Full Member level 2
Joined
Jun 12, 2006
Messages
122
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Location
Brazil
Activity points
2,144
Hi folks,

I´m starting programming embedded systems using Embedded Visual C++ 4.0. I need to do servo-control in this software, but to do this, i think i must use a timer, or something like this. I already use the OnTimer function, but i think using interrupt will be better. And i don´t know to do this. Can anybody help me? thanks a lot guys
 

bobcat1

Advanced Member level 4
Joined
Jul 10, 2002
Messages
1,288
Helped
99
Reputation
198
Reaction score
34
Trophy points
1,328
Activity points
8,545
Hi

Here is some example how to use interrupts and reg access in win CE

All the best

Bobi
 

    btminzon

    Points: 2
    Helpful Answer Positive Rating

btminzon

Full Member level 2
Joined
Jun 12, 2006
Messages
122
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Location
Brazil
Activity points
2,144
bobcat1 said:
Hi

Here is some example how to use interrupts and reg access in win CE

All the best

Bobi

Hey Bobi, thanks your excelent post. I´ve found also a good post at windowsfordevices.com

**broken link removed**

best regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top