poey_wong
Newbie level 4
cpw ground
Hi All,
I am a Final Year Degree Student. I have problem on design a multiple band (cover 850MHz, 1800MHz, 1900MHz and 2100MHz) PIFA with Grounded CPW Ground Plane. I have serveral question on it:
1. What is the material commonly used for the Grounded CPW? Can you specify all layer height?
2. How to calculate the CPW width by consider all the needed frequencies?
FYI:
1. I'm using CST Microwave Studio 2006 for this project.
2.I refer to "Design of a Planar Inverted-F Antenna With Very Wide Impedance Bandwidth", Hoon Park, Kyungho Chung, and Jaehoon Choi, IEEE Microwave and Wireless Components Letters, Vol. 16 No. 3, March 2006.
Please help me on this project. Infinite Thanks!
Hi All,
I am a Final Year Degree Student. I have problem on design a multiple band (cover 850MHz, 1800MHz, 1900MHz and 2100MHz) PIFA with Grounded CPW Ground Plane. I have serveral question on it:
1. What is the material commonly used for the Grounded CPW? Can you specify all layer height?
2. How to calculate the CPW width by consider all the needed frequencies?
FYI:
1. I'm using CST Microwave Studio 2006 for this project.
2.I refer to "Design of a Planar Inverted-F Antenna With Very Wide Impedance Bandwidth", Hoon Park, Kyungho Chung, and Jaehoon Choi, IEEE Microwave and Wireless Components Letters, Vol. 16 No. 3, March 2006.
Please help me on this project. Infinite Thanks!
