Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help needed for st power line modem

Status
Not open for further replies.

fireplus

Full Member level 3
Joined
Oct 31, 2003
Messages
182
Helped
7
Reputation
14
Reaction score
3
Trophy points
1,298
Activity points
1,633
i have a toko coil (a042) it's frequency at 125khz
but the data sheet tells that you may use T1002N it's fequency at 100khz
can i use a042 or not???
any body have any information on this field please let me know
the resource on the net is very low
if you could help please :oops:
 

I would go with what the datasheet says.

You said you had a power line modem problem? IS this the big transformer on the board that you are talking about or one of the toroids or other coils?
 

in ur application the transformer is not involved in any resonance action
i think it's only for isolation
 

i don't have the demo board only i have the st modem and toko coil a042 the remaning system i will build it
i don't have any seminar or books in this field
i hope also if any body have any thing in this field please upload
or any helpful links :oops: :oops: :oops:
 

here's all what i have about P line modem
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top