Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me implement USB to Ethernet interface

Status
Not open for further replies.
Z

zpc

Junior Member level 1
Joined
Feb 19, 2003
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
106
I need implement a USB to Ethernet interface,Who can help me? thanks.
 

USB to Ethernet

Hi aldevan:
The FT232bm is a USB to RS232 chip.
but i need the pc operate USB like a Ethernet interface. It may be don't do it.
 

Re: USB to Ethernet

Hi,
have a look at: http://www.ethernut.de/en/
They build a atmelmega128-board with ethernet. schematics and a little operating system are free of charge. and if you use the ft232 at one rs232 of the atmel controller you have your usb-to-ethernet conncetion.
greetings,
hqqh
 

Re: USB to Ethernet

Single Chip USB 2.0 to Ethernet
**broken link removed**
**broken link removed**
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top