Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help in LNA design urgently

Status
Not open for further replies.

mostafa_maarouf

Junior Member level 1
Joined
Feb 6, 2005
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
142
I want to make my LNA is imune to process variationg and i also would like to know how to design the bias circuitry needed for the lna, i'm desigining a normal cs ind degen lna and i'm modifiying it right now according to the paper of asgaran
TO ilminate the soruce inductor to increase the gain

can any on help me with the process imunity and the bias circuitry urgently as i might need to finish the whole design before the start of november :(
any help references, papers, websites , simple words will be appreciated
 

parameswar

Newbie level 3
Joined
Jul 31, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
try using shunt feedback (if u have enough gain), this will not only improve ur return loss but will also make ur active device less sensitive to process variations.

Added after 1 minutes:

try using shunt feedback (if u have enough gain), this will not only improve ur return losses but will also make ur device less sensitive to process variations.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top