Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help: Design compiler error

Status
Not open for further replies.
D

dreamscome

Junior Member level 2
Joined
Apr 12, 2004
Messages
23
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
138
When I run dc_shell on RT9.
It said:
"Incorrectly built binary which accesses errno or h_errno directly. Needs to be fixed."

What did it mean?
Thanks!
 

RH9 is not compatible with DC. You should use RH7.2.
 

:(

But how to let RT9 support DC?
 

export LD_ASSUME_KERNEL=2.4.1
 

although you can finally run dc on rh9, it is strongly recommended that you go back to rh7.3 because it will yield more reliable result.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top