Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Hardware Implementation of Rijndael SBOX using Logic Gates

Status
Not open for further replies.
kumarghz

kumarghz

Member level 5
Joined
Nov 25, 2006
Messages
85
Helped
10
Reputation
20
Reaction score
7
Trophy points
1,288
Location
Penang, malaysia
Activity points
1,938
Can somebody teach me how to implements Rijindael SBOX using Logic Gates (hardware)...pls help

regards,
Kumar
 

The article of Stefan Tillich is a good starting point:

Stefan Tillich, Martin Feldhofer, Johann Großschädl - "Area, Delay, and Power Characteristics of Standard-Cell Implementations of the AES S-Box" - Embedded computer systems: architectures, modeling, and simulation, 2006.

I would use the Canright approach -- unless it does not satisfy performance requirements.

Regards,
Johannes.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top