Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Generating a clock signal from an incoming serial data

Status
Not open for further replies.
Joined
Sep 3, 2007
Messages
853
Helped
66
Reputation
132
Reaction score
16
Trophy points
1,298
Activity points
0
Hi,
I need a idea to generate a clock signal from an incoming serial data.
Is there any reference explaning the principe of recovery and/or a vhdl source code of such module ?

Thanks in advance
 

hamed_sotoudi

Full Member level 3
Joined
Aug 1, 2007
Messages
158
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,298
Location
Germany Hamburg
Activity points
2,207
Re: Clock recovery

Hi
u can see the serial ports of microcontroller for example download ATMEGA8 datasheet and check its usart port architecture.
 

Joined
Sep 3, 2007
Messages
853
Helped
66
Reputation
132
Reaction score
16
Trophy points
1,298
Activity points
0
Clock recovery

Hi,
Where can i found documentations ?
Thanks.
 

hamed_sotoudi

Full Member level 3
Joined
Aug 1, 2007
Messages
158
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,298
Location
Germany Hamburg
Activity points
2,207
Re: Clock recovery

Hi
search in google for atmega8 datasheet. and download it. be careful not to download the priliminary datasheet. download the full datasheet.its about 300 pages.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top