Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

General TV Repair question - plz help

Status
Not open for further replies.

Naw_S

Member level 2
Joined
Jan 6, 2006
Messages
47
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
1,681
czech tv repairs

i'm a beginner in tv repairs and need some info on the expected values at the main point point in tv,like the base and emitter value of the horizontal output transistor or the vcc value of the vertical ic,etc. can anyone plz help thanks.
 

IQBAL KHAN

Member level 3
Joined
Aug 29, 2004
Messages
64
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Activity points
426
hi there
it is basicaly some modles that are commonly
used
it is the model number specification which indicate the base emitter and collecter and the region of operation
the good excersice is to lok the tv by section wise
this will make the clear concepts in tv signal processing
 

Naw_S

Member level 2
Joined
Jan 6, 2006
Messages
47
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
1,681
thanks, do you have any tutorial or info on how the tv set works,where the signal pass section by section?
 

sawwa7

Full Member level 6
Joined
Oct 30, 2004
Messages
331
Helped
63
Reputation
126
Reaction score
29
Trophy points
1,308
Activity points
2,675
hi Naw_S
here's a very good training manuals that help so much understanding how tv works and examin every circuit and how it works , hope this will help u
good luck
 

sawwa7

Full Member level 6
Joined
Oct 30, 2004
Messages
331
Helped
63
Reputation
126
Reaction score
29
Trophy points
1,308
Activity points
2,675
another good training philips manuals hope it helps :)
 

sawwa7

Full Member level 6
Joined
Oct 30, 2004
Messages
331
Helped
63
Reputation
126
Reaction score
29
Trophy points
1,308
Activity points
2,675
hi again
here's anothe one more good training manual
Kind Regards
 

Naw_S

Member level 2
Joined
Jan 6, 2006
Messages
47
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
1,681
thanks,these training manual are better than the service manual.
 

Naw_S

Member level 2
Joined
Jan 6, 2006
Messages
47
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
1,681
can anyone tell me what is the meaning of B+ in t.v
 

sawwa7

Full Member level 6
Joined
Oct 30, 2004
Messages
331
Helped
63
Reputation
126
Reaction score
29
Trophy points
1,308
Activity points
2,675
Naw_S said:
can anyone tell me what is the meaning of B+ in t.v

it's the main output from the secondary side of power supply which always fed to the collector of HOT.
regards
 

Naw_S

Member level 2
Joined
Jan 6, 2006
Messages
47
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,286
Activity points
1,681
thanks and what is its default voltage in t.v set
 

bjeservice

Member level 2
Joined
Jun 8, 2005
Messages
45
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
1,657
there is no default value , its depends on tv design but normaly it is high. generaly i saw 110 volt dc
 

IQBAL KHAN

Member level 3
Joined
Aug 29, 2004
Messages
64
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Activity points
426
it depend on the input supply and also on the tripller cirut also if further voltage required at other ends
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top