if the SRF needs to be considered, the only way is to design the capacitors and inductors using microstrip lines,
will there be any problems if the microstrip lines were used instead of the discreet components?
also i calculated the width and length required for the inductance and capacitance of 3nH and 100nF respectively,using the following equations,
L=(Z0/(2*PI*F))*Sin((2*PI*l)/lambda)
C=(1/(2*PI*F*Z0))*tan(PI*l/Lambda)
but the problem encountered was that the Z0 needs to be 1000 ohms and the trace width according to ADS is around 3 mils which cannot be fabraticated by me,
kindly let me know if there is any other way of designing an inductor or capacitor using the microstrip lines.:smile: