Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FPGA Board with some ADC

Status
Not open for further replies.

thsutikno

Newbie level 3
Joined
Sep 8, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Malaysia
Activity points
1,298
fpga boards with adcs

I want to design my project with FPGA that it has 4 high speed ADC or more. what should I use FPGA?
 

oursriharsha

Member level 3
Joined
Apr 23, 2009
Messages
54
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Location
Mumbai, India
Activity points
1,622
adc fpga board

Is it that you want an FPGA with more than 4 Analog I/O s you mean to say ?
and if it is so , you can opt for Fusion device from Actel with 600k gates and 30 Analog I/Os. (AFS600)
 

thsutikno

Newbie level 3
Joined
Sep 8, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Malaysia
Activity points
1,298
fpga adc

Yet. I has studying about motor control based on FPGA, and I need 4 analog input or more (support 4 high speed ADC or more).
Thank for your information. I will check ACTEL FPGA. Currently I use Altera FPGA, but I want to find a comparator to do it
 

farhada

Advanced Member level 2
Joined
Oct 1, 2004
Messages
589
Helped
84
Reputation
168
Reaction score
30
Trophy points
1,308
Location
Nice, France
Activity points
5,027
cheap 2 adc fpga board

Ok,
First of all you have to specity what you mean by high-speed, high speed in ADC terms can be anything from 1MSPS to 1GSPS, then it all depends on what you want to do with the data after you captured them.

Any FPGA is good for 1MSPS ADCs but there no FPGAs as I know who can support an ADC at 1GSPS without some very special PCB tricks.

Best regards,
/Farhad
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top