Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Filter design unit in ADS

Status
Not open for further replies.

Sadegh.j

Advanced Member level 3
Joined
Nov 29, 2006
Messages
754
Helped
48
Reputation
98
Reaction score
15
Trophy points
1,298
Activity points
5,596
Hey all

I want to design a filter in ADS, say low pass. But I don't want to be involved in the detailed designing process. What I want is a unit in ADS that does the filtering for me. Is there any such thing?
 

Sadegh.j

Advanced Member level 3
Joined
Nov 29, 2006
Messages
754
Helped
48
Reputation
98
Reaction score
15
Trophy points
1,298
Activity points
5,596
filter design guide of ads

Thanks,

as I said, I am looking at the filter as a black box, nothing is important, it should just do the filtering.
 

khouly

Advanced Member level 5
Joined
Oct 20, 2003
Messages
2,368
Helped
461
Reputation
916
Reaction score
101
Trophy points
1,343
Location
EGYPT
Activity points
13,244
Filter design ion ADS

yeah in ADS there is a filter design guide so it can be done very easily . use it it is very easy

khouly
 

dingjingfeng

Full Member level 4
Joined
Aug 12, 2005
Messages
190
Helped
17
Reputation
34
Reaction score
8
Trophy points
1,298
Activity points
2,243
Re: Filter design ion ADS

khouly said:
yeah in ADS there is a filter design guide so it can be done very easily . use it it is very easy

khouly


totally agree

read more about the helf files
 

Soben

Member level 3
Joined
Oct 19, 2005
Messages
56
Helped
20
Reputation
40
Reaction score
3
Trophy points
1,288
Activity points
1,880
Re: Filter design ion ADS

Sadegh.j said:
Thanks,

as I said, I am looking at the filter as a black box, nothing is important, it should just do the filtering.

ADS has both filter synthesis tool and also filter blocks either LP HP BP etc where you can set the filter performance and use it as a black box.
 

John_li

Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,944
Filter design in ADS

ADS has more funtions about the filter design.enter your paramete and filter type your need.simulate and tune,you can get it.
 

raghuram_msc

Full Member level 1
Joined
Jul 3, 2007
Messages
95
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,286
Activity points
1,930
Re: Filter design in ADS

Hi all,

Every design environment has what is called a "Synthesis Wizard" and ADS is no exception.....! The question here is whether sadegh.j is looking a filter at a component level or at a system level? Luckily ADS has both provisons. One can take a filter "Block" directly if the filter is part of a system, or else just "ask" the wizard to synthesise an appropriate filter (viz butterworth, chebyshev, etc..) and then run simulation on it.....!

With ADS every thing is possible....!!! (or did i sound too optimistic???!!!)

All the best..!

Sai
 

khouly

Advanced Member level 5
Joined
Oct 20, 2003
Messages
2,368
Helped
461
Reputation
916
Reaction score
101
Trophy points
1,343
Location
EGYPT
Activity points
13,244
Filter design in ADS

no u don't optimistic , but realy ADS is loaded with alot of features u can spend alot of time learning them :)

khouly
 

ADS_RFMW

Full Member level 2
Joined
Aug 18, 2005
Messages
126
Helped
7
Reputation
14
Reaction score
4
Trophy points
1,298
Activity points
1,797
Re: Filter design in ADS

Yes, Agilent ADS has all the capabilities required for implimentation of RF & Microwave Circuits from spec to manufacturing including testing capabilities.
U can have a black box ie ideal behaviral filter or circuit schematic.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top