Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FET Switch in AVL Modules

Status
Not open for further replies.
G

gorkin

Advanced Member level 1
Joined
Feb 27, 2002
Messages
422
Helped
13
Reputation
26
Reaction score
5
Trophy points
1,298
Location
brazil
Activity points
3,375
Hi all!
I am planned use Low Side FET Switch in output. Reading the manufature specification I founded that the NIF5002NT3G (On Semiconductor) have overtemperature and overcurrent limit. Anyone have experience with this device? In my case are for autommotive application and the loads connected in switch maybe a external relays or other commons autommotive loads (like sirens, for example). It´s necessary any special requeriments?

Thanks in advance, Gorkin.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top