Sep 14, 2011 #1 F freelance84 Newbie level 1 Joined Sep 14, 2011 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,287 We have two networks, one sealed and open to the internet. Does this already exist? I want a switch to flip between the two, so a computer must disconnect from one network before connecting to the other... I've attached a sketch of what i'm after... Thanks, John Attachments IMAG0416.jpg 1.1 MB · Views: 57
We have two networks, one sealed and open to the internet. Does this already exist? I want a switch to flip between the two, so a computer must disconnect from one network before connecting to the other... I've attached a sketch of what i'm after... Thanks, John
Sep 14, 2011 #2 kak111 Advanced Member level 4 Joined Mar 30, 2011 Messages 1,365 Helped 933 Reputation 1,868 Reaction score 907 Trophy points 1,413 Location Finland Activity points 10,827 You can build one without problems, just make sure to use good components (to avoid slow speeds and inserting noise in the network) Or buy this 8P8C (RJ-45) switchbox Ziotek 2 to 1 RJ45 Switchbox ZT1050050
You can build one without problems, just make sure to use good components (to avoid slow speeds and inserting noise in the network) Or buy this 8P8C (RJ-45) switchbox Ziotek 2 to 1 RJ45 Switchbox ZT1050050
Sep 15, 2011 #3 Raza Advanced Member level 3 Joined Feb 10, 2002 Messages 828 Helped 266 Reputation 530 Reaction score 259 Trophy points 1,343 Location PAK Activity points 4,486 Hi, Yes it is possible. But you have to use a very good quality of the switch or you will get the speed loss and noise. The switch is supposed to be Two way 6 Poles. Like the one attached in the image:
Hi, Yes it is possible. But you have to use a very good quality of the switch or you will get the speed loss and noise. The switch is supposed to be Two way 6 Poles. Like the one attached in the image: