Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ethernet cable hardware switch for two networks

Status
Not open for further replies.

freelance84

Newbie level 1
Joined
Sep 14, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
We have two networks, one sealed and open to the internet.

Does this already exist? I want a switch to flip between the two, so a computer must disconnect from one network before connecting to the other...

I've attached a sketch of what i'm after...


Thanks,

John
 

Attachments

  • IMAG0416.jpg
    IMAG0416.jpg
    1.1 MB · Views: 7

Raza

Advanced Member level 3
Joined
Feb 10, 2002
Messages
829
Helped
265
Reputation
528
Reaction score
258
Trophy points
1,343
Location
PAK
Activity points
4,486
Hi,
Yes it is possible. But you have to use a very good quality of the switch or you will get the speed loss and noise. The switch is supposed to be Two way 6 Poles. Like the one attached in the image:
switch.jpg
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top