Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

embedded c code for GSM receiving code....

Status
Not open for further replies.

ganesh dvk

Junior Member level 1
Joined
Oct 11, 2012
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai
Activity points
1,359
hi seniors,
am trying the data to gsm modem to gsm modem ...i have a problem with the receiving path in gsm and to split the data from micro controler .....tis a problem...any one help tis code..any sample ..pls send seniors.....
 

jjeevan007

Full Member level 5
Joined
Apr 13, 2012
Messages
311
Helped
44
Reputation
88
Reaction score
43
Trophy points
1,308
Location
bangalore
Activity points
2,781
which is the controller you are using,

which is C compiler u are using..........
 

alexxx

Advanced Member level 4
Joined
Apr 17, 2011
Messages
1,013
Helped
273
Reputation
552
Reaction score
270
Trophy points
1,383
Location
Greece
Activity points
7,938
i have a problem with the receiving path in gsm
What does this mean? You have a problem on the antenna path of the layout design?


and to split the data from micro controler ...
Sorry, I cannot suspect what problem could that be. Is it with the received data via UART?


What microcontroller and what GSM modem are you using?
 

ganesh dvk

Junior Member level 1
Joined
Oct 11, 2012
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai
Activity points
1,359
pic16f877a interface with max232 and rs232 to be connect the wavecom modem send the data after receiving is my problem?
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top