Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Eagle Pro: Import dxf....is this difficult?

Status
Not open for further replies.
T

treez

Guest
Hello,

I wish to import a dxf file from our mechanical guys into Eagle Pro.

I've read numerous posts on this site, and elsewhere about it, but is there any youtube video type lesson on it anywhere?

-Or is it really as simple as opening the dxf2scr ulp and just "going with the flow" so to speak.

Presumably the dxf file has to somehow get converted into a "part", because parts are the only thing that one can bring into the eagle pcb layout editor?

....I have found the Eagle website (cadsoft) is not providing explanations of dxf import, and what the process is all about.
 
Last edited by a moderator:

keith1200rs

Super Moderator
Staff member
Joined
Oct 9, 2009
Messages
10,877
Helped
2,065
Reputation
4,130
Reaction score
1,597
Trophy points
1,403
Location
Yorkshire, UK
Activity points
57,269
As far as I know the dxf will be imported as tracks which you can put on any layer. The best thing to do is simply try it on a blank board to try to get the settings right.

Keith
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating

keith1200rs

Super Moderator
Staff member
Joined
Oct 9, 2009
Messages
10,877
Helped
2,065
Reputation
4,130
Reaction score
1,597
Trophy points
1,403
Location
Yorkshire, UK
Activity points
57,269
I see the forum gremlins are back!

Keith.
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top