Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Eagle pro: Deleting a resistor "R10" in the schem, then replacing it with same name?

Status
Not open for further replies.
T

treez

Guest
Eagle pro: Deleting a resistor "R10" in the schem, then replacing it with same name?

Hello,

I must now change all the 0805 resistors in the schematic to 0603 types......but how do i make sure that when i delete "R10", say, that the new one i put in is still "R10"?
 

keith1200rs

Super Moderator
Staff member
Joined
Oct 9, 2009
Messages
10,877
Helped
2,065
Reputation
4,130
Reaction score
1,597
Trophy points
1,403
Location
Yorkshire, UK
Activity points
57,269
Re: Eagle pro: Deleting a resistor "R10" in the schem, then replacing it with same na

If you used the Eagle library parts (or your own if they were made correctly) you should be able to simply select "change" "package" and pick a new package. You can do it in either the schematic or PCB.

Keith.
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top