dainis said:It is more easy:
1) for up to 10 Mbit HDLC or E1 channel use
Samsung ARM core System on Chip (SoC) S3C4530A 16/32-bit RISC microcontroller
--snip-----X-----------------
dainis said:Redux PrimaGate® RS-120 has sync HDLC port and you may use any external Line interface unit (LIU) and E1 (G.704) framer,
if you need fractional E1 interface.
PrimaGate® RS-120 is for direct raplacement for Rads ChipBridge RJ-17.
If you need more powerfull and programmeble chip, look Redux AptaGate® RX-100 chip, it contains internal Time Slot Assigner (TSA).
Soory to interject. The seemingly difficult task you are talking about issending 10/100 Mbps through E1. This is actually not quite the way it looks. In fact most of the switches do the same.cactus_studio said:Hi my_garden:
You said, for one E1 to transmit one 10 baseT it is important not only processinng ethernet frames but also processing IP Packets. But I wander how you can accomodate 10 baseT signal only in one E1? Is that possible?
Although I know in processing Etherenet frames and then IP packets , we can reduce the Ethernet frame length dramatically. But is that true, 10 BaseT in only ONE E1 ?
Can you give me some detailed analysises ?
Many thanks.
cactus_studio
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?