Dual Band Microstrip Patch Antenna HFSS

Status
Not open for further replies.
B

belbimas

Newbie
Joined
Apr 22, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,309
Hello to everyone, ,I am a ms student and new at forums. I have designed dual band(2.4 ghz and 5.8 ghz) wifi antenna and simulated it using HFSS. I have attached the project file and would be happy if anyone checked it whether everything is ok or not. Specially, i am worry about gain issue. Thanx alot
 

Attachments

  • dualBand.zip
    16.3 MB · Views: 330

Hi.
I checked your design.
at first this warning appears:
[warning] Warning - Boundary 'Rad1' and Boundary 'PerfE1' overlap.
but no problem,with modify dimensions of air box this warning will be removed.
you have 2 resonant freq with acceptable shift and you should know that FR4 can not give high gain because it is a lossy material.
Good Luck
 
Thank you fereshteh, yes there is a warning about radiation boundary but i dont care that much.
 

dear belbimas,
i am also working on dual band patch antennas for wifi and wlan aplications.. i am interested and want to study your designed antenna. can you please share the technical details/report of this antenna? i shall be very thankful to you..
 
Reactions: metrika

    V

    Points: 2
    Helpful Answer Positive Rating
    M

    metrika

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…