garu525
Newbie level 4
I have a few questions regarding my project. I'm a CompE major student so my analog skills are rusty. Thanks in advance, all my questions are in bold.
Design an amplifier which has the following capabilities:
1. Two inputs one plus , one negative
2. Capable of driving a 50 K ohm load to +/- 10 V Vout at 10v with RL of 50K?
3. Frequency response DC - 10MHz + 2 db. Not sure about this, Gain x BW?
4. The input impedance must be at least 1 Megohm
5. The output impedance must be less than 50 ohms
6. Only discrete devices (BJT, FET, TUBES) may be used.
7. This amplifier will be packaged in such a way that it does not exceed more than 3 inches on any side.
8. Temperature range: 25 -- 100oC Just sum the temperatures from datasheet?
9. The gain must be between 1000 - 1500
Design an amplifier which has the following capabilities:
1. Two inputs one plus , one negative
2. Capable of driving a 50 K ohm load to +/- 10 V Vout at 10v with RL of 50K?
3. Frequency response DC - 10MHz + 2 db. Not sure about this, Gain x BW?
4. The input impedance must be at least 1 Megohm
5. The output impedance must be less than 50 ohms
6. Only discrete devices (BJT, FET, TUBES) may be used.
7. This amplifier will be packaged in such a way that it does not exceed more than 3 inches on any side.
8. Temperature range: 25 -- 100oC Just sum the temperatures from datasheet?
9. The gain must be between 1000 - 1500