Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Differential Spiral Simulation in HFSS

Status
Not open for further replies.
L

Learn2Fly

Junior Member level 3
Junior Member level 3
Joined
Apr 26, 2005
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,534
Hi, I'm now using HFSS to simulate a differential spiral. Since most of the HFSS examples available are single-ended, could anyone here please advice me how to assign excitation to the differential ports and the common-mode port?

Thank you very much.

L2F
 

Anyone? Please!!!

Thank you!
 

You should use lumped port to define a differential port in HFSS. Place a rectangular sheet between the spiral arms and assign a lumped port to it. Hope it helps!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top