Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

design for High voltage suppply from 24V DC to 1500 V DC.

Status
Not open for further replies.
B

bdmehta

Newbie level 6
Joined
Feb 22, 2005
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,401
Members,

I am in need to design High VOltage Power supply, input is 230V Ac,

then converted to +24V DC by rectifier. and then I need to make DC DC Converter from 24V DC to 1500 V DC. total power will be about 25 to 30 Watts.

Is there useful circuit is available for this type of requirement? Please send me some references.

Regards,

Bharatkumar
 

Hi,
Why do not you direct convert it from rectified mains voltage to 1.5KV pls_ or is a 24 power bus in system needed?
K.
 

Re: design for High voltage suppply from 24V DC to 1500 V DC

Hello Bharat kumar, i will be more simpler for you to step it to 1.5kv from the mains, but if prefer the 24v to 1.5kv then you need to apply the boost topology, dc to dc converter.
 

Hi,
Did you checked tictac`s topic ps?

He generates from 24V a 1300V, 40mA output...
K.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top