Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

design a Vref ,need help

Status
Not open for further replies.

xerxer

Junior Member level 3
Joined
Nov 15, 2005
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,523
I need design a bandgap reference of 2.485V or so ,my boss said he need torlerance is ±2mv ,i can't reach it beacause The TC≈4ppm at 2.485v bandgap reference ,at the same time ,temperature -40~125,vcc 4~6.5 ,PSR about 100ppm..
although the bandgap cann't be desgin ,but i want to try my best to design the bandgap . The voltage reference is based on pure mos techonlogy ,only pnp and mos are achieved.
please veteran give my some advice , books or structures about high voltage bandgap voltage reference .thanks a lot.
 

zenisle

Full Member level 2
Joined
Sep 11, 2005
Messages
129
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
1,987
design a bandgap and use a regulator stracutre
 

derekqiao

Member level 2
Joined
Nov 11, 2004
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
335
You can consider the low voltage bandgap:
"a CMOS bandgap reference circuit with sub-1v operation"
 

xerxer

Junior Member level 3
Joined
Nov 15, 2005
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,523
i have implemented it .-40~125°C 2.485±0.7mv vcc:4~6.5 ±0.5mv ,3ks a lot .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top