Depth of bobbin for ferrite core

[treez]

Hello
Do you know what is the bobbin depth of the horizontal through hole bobbin here?
(We need to know the depth of the bobbin so we can see if the layers of coils fit in and don’t overspill the bobbin)
E13/7/4 ferrite core and bobbin.
https://en.tdk.eu/inf/80/db/fer/e_13_7_4.pdf

 

[smijesh]

Well your coil thickness should be less than 2.4mm[ (8.7-3.9)/2 = 2.4]
Winding length should not cross 7.8mm

 

[FvM]

Your calculation is without any bobbin. With manufacturer bobbin:
H=(8.7-5.1)/2 = 1.8 mm, 1.9 mm if you allow the winding to touch the core. W=7.5 mm