Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Wish to buy EPC17 transformer ferrite/bobbin/clamp

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,669
Helped
54
Reputation
108
Reaction score
116
Trophy points
63
Activity points
14,033
Hi,
We wish to make some EPC17 flyback transformers.

We wish to buy the following……..

BEPC-17-119GA (Former)
FEPC-17-A (Clamp)
PC44EPC17A080 (Gapped ferrite half for AL=80)
PC44EPC17-Z (ungapped ferrite half)

….Do you know where to buy?, they are not on digikey, pulse electronics, mouser, RS, Farnell, Kaschke, cosmos, Elna…or anywhere else
 
If you haven't misunderstood it, you need a metal clamp for fixing the framework when winding the transformer. If so, we suggest you find a metal processing factory to customize and use aluminum ingot cutting for processing.
 
Hi,
We wish to make some EPC17 flyback transformers.

We wish to buy the following……..

BEPC-17-119GA (Former)
FEPC-17-A (Clamp)
PC44EPC17A080 (Gapped ferrite half for AL=80)
PC44EPC17-Z (ungapped ferrite half)

….Do you know where to buy?, they are not on digikey, pulse electronics, mouser, RS, Farnell, Kaschke, cosmos, Elna…or anywhere else
kevin@hengchuangxin.com
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top