Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DC-to-DC converter for Icom IC90E

Status
Not open for further replies.

scoppulal

Full Member level 2
Joined
Apr 18, 2004
Messages
122
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,298
Activity points
1,007
DC-to-DC converter

Hi everybody!

I own an Icom IC90E and don't want to buy its cigarette lighter socket adapter CP-19E... could someone help with any schematic of something similar??

You could find its specs all over the internet with ease.

Any help would be appreciated.
Thanks in advance.

Ciao
 

Re: DC-to-DC converter

Could you please post the specs yourself?
 

Re: DC-to-DC converter

HI

The specs are:

voltage supplied in the range 5:11V never exceed 11.5V
The input should be a regulated 12V DC

Current drain @8.0V DC will be 2.0A maximum while transmitting
and 300mA while receiving

I wanted to use a 7808 fixed voltage regulator... but any other idea is welcome.
 

DC-to-DC converter

Use LM2576
It's datasheet and circuit is:
**broken link removed**
:D

Regards,
Davood.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top