Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DC-DC converter driver

Status
Not open for further replies.
J

jayzac

Newbie level 6
Joined
Nov 30, 2009
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,380
Below is my design of buck converter to step down the voltage of solar input to 12v to charge a battery. My question is this configuration works for the selection of MOSFET driver TC4428 ? Is it able to switch the mosfet fast enough ? Thanks in advanced.
 

hi,
check the datasheet of your driver tc4428 and look for rise time,fall tilme and delay of switching and compare it with your circuit requirements ,
I think you will not have problem for tens of kilohertz
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top