Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

cystal oscillator ESD design

Status
Not open for further replies.

mydreamhouse

Advanced Member level 4
Joined
Oct 7, 2005
Messages
104
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Activity points
1,895
cystal oscillator

who can give some reference about design ESD for low power crystal oscillator?
for instance, ESD for 32.768Khz OSC, must be low leakage ESD
thanks
 

oscillator esd

just use the common ESD, and series a small resistor at the oscillator output, such as 300ohm

mydreamhouse said:
who can give some reference about design ESD for low power crystal oscillator?
for instance, ESD for 32.768Khz OSC, must be low leakage ESD
thanks
 

esd diode for crystal oscillator

mydreamhouse said:
who can give some reference about design ESD for low power crystal oscillator?
for instance, ESD for 32.768Khz OSC, must be low leakage ESD
thanks

I use ggPMOS and ggNMOS for the ESD protect. But I design layout of the MOS connected the pad by the ESD rule.
 

Re: oscillator esd

Hi buckaroo,

Any reason for picking up 300 ohm? Can it be, say, 1k? Thanks.


tommydidi


just use the common ESD, and series a small resistor at the oscillator output, such as 300ohm
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top