Creating Split Planes PADS Help!!

Status
Not open for further replies.
D

dovo

Junior Member level 3
Joined
Sep 30, 2002
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
134
I am using PAD 9.3. and try following the tutor to do a split plan.
After selected Board Outline and convert it to plan area. And then use auto Plan separate-Set Grid 25 mils.
after draw around the plan area, PADS give me a message:
All Corners must be within the plane are polygon..
What can I do wrong?
DV
 

Hi, thanks for answer but I don't understand by clicking on the other side to end the auto plan separate.
I upload the image see Is any one have any idea.

HTML:
<a href="http://obrazki.elektroda.pl/97_1331597072.jpg"><img src="http://obrazki.elektroda.pl/97_1331597072_thumb.jpg" alt="97_1331597072.jpg" /></a>
URL:
https://obrazki.elektroda.pl/97_1331597072.jpg
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…