Creating Split Planes PADS Help!!

[dovo]

I am using PAD 9.3. and try following the tutor to do a split plan.
After selected Board Outline and convert it to plan area. And then use auto Plan separate-Set Grid 25 mils.
after draw around the plan area, PADS give me a message:
All Corners must be within the plane are polygon..
What can I do wrong?
DV

 

[popoyboys]

try clicking on the other side to end the auto plane separate...

 

[dovo]

Hi, thanks for answer but I don't understand by clicking on the other side to end the auto plan separate.
I upload the image see Is any one have any idea.

HTML:
<a href="http://obrazki.elektroda.pl/97_1331597072.jpg"><img src="http://obrazki.elektroda.pl/97_1331597072_thumb.jpg" alt="97_1331597072.jpg" /></a>
URL:
https://obrazki.elektroda.pl/97_1331597072.jpg