# Converting source code from at90s2313 to Attiny2313

Status
Not open for further replies.

#### baarbood

##### Newbie level 1
hello
i cant speak english very well
i build this project with tiny2313

Scrolling text display
https://koti.mbnet.fi/zyc/LedDisp

,and this didn't work, i hope attiny2313 code need minor change to be replacing with at90s2313

thank a lot

#### ctownsend

You should read the ATMEL APPLICATION Note titled : AVR091.
Do a google search for it.

I don't know C very well but try this. Let me know if it works.

All you have to do is just follow the signal name changes and the register name changes as in the AVR091 application note. The changes are in the USART and some timer registers.

Then change the line in makefile to:
Code:
#MCU name
MCU = attiny2313

Good Luck

Points: 2