Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

convergence -feko - patch antenna

Status
Not open for further replies.
D

d2_asimov

Newbie level 5
Joined
Jan 22, 2008
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,335
feko convergence

hello everyone..
im modeling a rectangular patch antenna with a uslot on an infinite ground plane in FEKO.... however i noticed that the results were different from IE3D for the same geometry. I want to use a coaxial feed but ended up using a wire port in feko.Can anyone tell me if that is the reason im getting the difference in VSWR?i would definitely like some expert advice on this...
 

feko+patch+antenna

i figured how to use the control card to define a coaxial port.but am having convergence problem.Is it because of the segment length?? can anyone shed light on this?
Thanks..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top