controlling servo motors using FPGA

[nanobots]

Hi.. i need your helps to built a programming code @ block diagram to control the servo motors.. i'm newbie in this digital design.. please somebody help me.. u can email the programming code to syahir_kb@yahoo.com.

Tq

 

[samcheetah]

Here is something to get you started

https://www.fpga4fun.com/RCServos.html

I hope that helps.

 

[nanobots]

My project is controlling the R/C helicopter servo motors using FPGA.. This FPGA will be functioned as the remote control for the helicopter.. i would like to make the helicopter fly forward for 60seconds then left and right for 10 seconds.. I don't have any idea to programming the FPGA for this project.. so i need your helps to guide me to finished this project..

Tq

 

[blueroomelectronics]

Maybe you should pick a simpler project. Flashing an LED is a good start.

 

[samcheetah]

If you have no prior knowledge of FPGAs/Digital Design then I second blueroomelectronics. You should start with something easy like he said. Once you get into the game, you can come back to the FPGA4Fun tutorial link I gave you.