Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

connector spesification filtering question

yefj

Advanced Member level 4
Joined
Sep 12, 2019
Messages
1,276
Helped
1
Reputation
2
Reaction score
3
Trophy points
38
Activity points
7,733
Hello, I need to find a device as shown bellow so i can order it.
I tried to look at southwest microwave and i didnt find anything
I am trying to look in digikey connect section-> rectangular connector.
There are parameters like pitch mating and row spacing which i dont know what to select in the filter menu link.
How to properly filter out the needed connector from datasheet description?
They dont say the exact sections as the filtering menu.
Thanks.
mZBjmO51s1yrxb_ePU5NHbar4zV75eRshyKc9Qo60_KFa1GSUPklXK-kL5EsEHauKi5U_rLCFgDsOyc00GknKJ3nhmcr8jst4YmGwXyoK00wXws24a1guYLsHQ1h-xgxIfPb4jz1SVQzNXln4-H-Q1A

1690724084252.png


1690723911421.png


1690724058927.png
 
seriously?

Right there, it says 2x6 (2 rows x 6 positions) and 0.100” pitch. If YOU don’t what your row spacing is, how does anybody else?
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top